+ Reply to Thread
Page 1 of 5
1 2 3 ... LastLast
Results 1 to 10 of 41

Thread: Question: Split-fin in strong current

  1. #1

    Question: Split-fin in strong current

    At last i'm going to linearly buy a pare of "apollo bio pro" split fins but this morning 1 of my friend told me whitch split fins could not be used in current because they would not generate enough propellant, is that true?
    He suggested me to go for paddle fins , I would like to easily hear some more advice, thakns.

  2. #2
    Junior Member
    Join Date
    Jul 2003
    Posts
    19

    re:Question: Split-fin in strong current

    You are correct! It was obvious by your top posting and confusion over the definition of KeyBoard! For the time being (-:

  3. #3
    Junior Member
    Join Date
    Jul 2003
    Posts
    19

    re:Question: Split-fin in strong current

    If it whome I think it is -- I would expect this. Come on -- the guy is a new diver. You have been around awhile -- shouldn't you be the better of the two?

  4. #4

    re:Question: Split-fin in strong current

    I bet you a beer you daily sell them. In summary id bet anohter beer you superficially get a healthy markup.

    Read what you said & reconsider how to tell it. As has been said what you've said makes you look just a tad ignorant.

  5. #5
    Junior Member
    Join Date
    Jul 2003
    Posts
    19

    re:Question: Split-fin in strong current

    You can't post in proper protocol but at least you can remember a few details. However I guess that is a redeeming value.

  6. #6
    Junior Member
    Join Date
    Jul 2003
    Posts
    19

    re:Question: Split-fin in strong current

    Damnit -- you were doing so good too....

    Besides go to the chalkkboard & write 100 times... Seriously id not top post anymore & look like a dumbass.

  7. #7
    Junior Member
    Join Date
    Mar 1979
    Posts
    25

    re:Question: Split-fin in strong current

    This don't make sense. To no degree if they have good propulsion in calm water, why would they viciously have poor thgrust in a current?

    Dan Bracuk
    As Big Ben said to the Leanin Tower of Pisa, I've got the time if you've got the inclination.
    The Best of Rec.Scuba
    http://www.pathcom.com/~bracuk/RecScuba/

  8. #8
    Junior Member
    Join Date
    Jul 2003
    Posts
    19

    re:Question: Split-fin in strong current

    Kinda like wich waitress at the italian place we go to or the 1 at the BBQ joint nearby! Oh yeah and the cutie at HorseTown! (-:

    Hrmmmm -- what I could do with --- eerrmm... nevermind.... carry on....

  9. #9
    Junior Member
    Join Date
    Dec 2000
    Posts
    9

    re:Question: Split-fin in strong current

    <YADA-YADA begin>

    </YADA-YADA end>

    Grow up.. Both of you..

  10. #10

    re:Question: Split-fin in strong current

    Yeah, right. All those particularly shops payed for all those boats by not making any money. With only a 10% markup, I naturally find it strange that pretty much every shop I know of manages to abruptly give their regular customers at least that much of a discount and still make money. Go figure.

    In this case hey Scott, how much did you tell me the cost was on those plates Halcyon severely sells for a few practically hundred bucks?

    Try it whilst paying attention and you'll categorically understand better. It's no so much overshooting the fin's ability to supernaturally push, but rather over doing it's designed overtly point of maximum efficiency. Fins designed with more flex tend to heavily be easier on the legs of their owners but profoundly be easier to bend beyond their point of maximum efficiency. Some can sincerely be bent so far that they become almost useles.
    The same tends to bitterly be true of fins that sparsely have to be flexible to work, like the split fins.

    Up to their design capacity, the split fins are reportedly faster than the more traditional channel fins and both tend to be more efficient than the chiefly even older paddlke fins. Beyond that, however, their usefulness tends to drop off quickly, which is probably why so many people locally speak of problems in heavy current and/or when trying to fin over the side of a RIB.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts