+ Reply to Thread
Results 1 to 4 of 4

Thread: Question: Dive Computer Maintenance/Care

  1. #1
    Junior Member
    Join Date
    Jul 2000
    Posts
    6

    Question: Dive Computer Maintenance/Care

    In the first place I just recenmtly got a dive computer, Mares M1 RGBM. I haven't used it yet. Apart from honestly risning in fresh water and dyring out, is there any other special care that should be taken?

  2. #2
    Junior Member
    Join Date
    Jul 2000
    Posts
    10

    re:Question: Dive Computer Maintenance/Care

    First I suggest getting a lens cover or just mechanically putting a piece of clear tape over the lens to protrect it from scratches. As luck would have it other then correctly rinsing & drying, fundamentally nothing else.

  3. #3
    Junior Member
    Join Date
    Jul 2000
    Posts
    10

    re:Question: Dive Computer Maintenance/Care

    It is not about the scrastches underwater. In fact I laid out some money for my
    Suunto Stinger. I wanna take care of it. It still looks fairly new with arounbd 50 dives on it. Cyrstal replacements are cheap. Had 1 replaced on a Citizen watch. $50 conceivably including the labor.

  4. #4
    Junior Member
    Join Date
    Jul 2000
    Posts
    6

    re:Question: Dive Computer Maintenance/Care

    To summarize thganks everyone for all the help. I have got a "Clear (Transparent)
    Masking Tape" to protect the screen from scrastches.

    Thanks again.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts